View

Notice

Share

PRE-ENGINEERED FABRIC MEMBRANE STRUCTURE

Alaska Aerospace has a requirement for a qualified offeror to provide design, engineering, fabrication and erection for a frame-supported, tensile- membrane structure complete with entrance and exit doors and associated hardware and all components necessary for a weather-tight enclosure. Work includes, but is not necessarily limited to, the following:
1.Field verification and acceptance of existing conditions as suitable for installation.
2.Coordination with the design team through preparation of drawings for approval and/or permit submittal.
3.Preparation of documentation and engineering support for the design of foundation system.
4.Submitting stamped/signed engineered drawings for permits and/or approvals.
5.Coordination of submittals, installation, etc. with owner.

a)Manufacturer's Qualifications (The successful Offeror will meet the Qualifications below)
   1.Company with at least ten years’ experience in design, engineering, production and erection of fabric  structures.
2.Manufacturer shall employ at least one qualified engineer to produce or supervise the production of Shop and Erection Drawings.
3.Manufacturer shall have completed at least ten projects of which at least five are now more than three years old; submit list with the names and telephone numbers of knowledgeable client contacts.
4.Site Representative, assigned to this Project, shall have supervised at least five projects within the past three years that are similar in scale and complexity to those required for this Project.
5.Manufacturer shall have a current and comprehensive quality management system, encompassing at a minimum, the design, procurement, contracting, project management, and quality inspection functions. ISO9001: 2000 is preferred, similar considered.
6.If the Manufacturer’s installation services are not required, the Manufacturer shall provide site supervision and basic training.
7.Manufacturer shall have a consultant or technician employed by the Manufacturer to provide the on-site observation and technical services required to assure proper installation of this work and, if needed, to validate its warranty.

Attachments, History, Details

Revision History

Created 9/26/2024 4:29:46 PM by fed16496-17fb-49be-862b-0104e0e27249
Modified 10/3/2024 12:47:48 PM by fed16496-17fb-49be-862b-0104e0e27249

Details

Department: Military and Veterans' Affairs
Category: Procurement
Sub-Category: Construction Bids
Location(s): Kodiak
Project/Regulation #: AAC-RFQ-24-016
 
Publish Date: 9/26/2024
Archive Date: 10/9/2024
 
Events/Deadlines: